[syborg tt]

Quick trip to the local Ace Hardware from more supplies



I needed to pick up a piece of flat stock so I could install the dash surround as the holes don't line up and also need a spacer.



I can't believe I haven't removed the steering wheel as it is been in the way so many times !!!









Off to Home Depot for more hardware.



Time to trim more of the Classic Dash Surround



Funny story. I was at the Doctor a couple of weeks ago and the Dermatologist used this little marker
on leg. Since I love Green & Blue I asked her if I could have the marker since they have to throw it out after they use
it. She said yes and thankfully I had it as I tried ever marker I had to mark the hole that I need to drill and nothing
worked. I decided to look in my truck and I found it and it worked perfectly.





I mounted the bracket to the dash bracket with a nut and bolt (sorry no picture) however before i installed I screwed the
sheet metal screw into so it would be easier to install the surround.



Surround is in !!!



Now for the rest of the stuff.



First Up is the headlight switch and if you guys have any ideas as what I can use to fill the hole below the switch I would love suggestions.



Autometer Clock



I know it looks crooked it's just an illusion



Da !!!! Next make sure you install the retaining bracket before you plug everything in.







Holley Dash wiring



GPS Signal wire

















Heading out to Dinner with my wife and daughter.