I am finally cleaning up and moving the parts I no longer need to the Attic.
Of course I took a couple pictures so I remember what I put up there
Finally pulling the tape of the drivers door as it;s been on their since I rebuilt the hinges.
Oh the fun.
So, this turned out to be much harder then I expected.
I couldn't get the stud started and I assumed it was because of the spring pressure.
Opps, I dropped it
Since the part was freshly powder coated I added a small amount of heat shrink to the bottom of the spring to protect the paint.
That was fun.
Apparently it was the paint that was keeping it from starting.
Got the tin man **** out.
You use the allen wrench to spin it.
Almost done
Nut is on and complete.
