Morning Donny,
I will flip it around this weekend and thank you for catching this I really appreciate it.
ps I looked back at old pictures and it was on the way you explained.
Quote:
Originally Posted by dontlifttoshift
Thanks for the side pic. That is all wrong and it will never be perfect but it can be better.
Turn the harness bar around so the welded tabs are on the back side but still pointed down. Then bolt the harnesses on the back side. I would consider bolting them on with the angle going forward even, assuming it will fit that way.
Side bar. Nobody you like should be sitting in that back seat with that harness bar there.
|
Thank you Matt I can't tell you how happy I was to get it out of the garage.
Quote:
Originally Posted by Cramer4918
Definitely and exciting day, Marty! I'm happy for you! It looks great rolling down the driveway on it's own power!  |
Hi Jeff,
Funny thing I was going to call you the other day to see how you were doing and I will give that a try next time.
Quote:
Originally Posted by Hotwire
CONGRATS MARTY!!!!
Next time need to fill up the cooling system on an LS, keep the top hose loose and fill from it, it will ensure you get the entire block full with hardly any air left in the system. It also bypasses the thermostat so filling is much quicker. Basically the same idea as pulling the thermostat housing from a SBC/BBC and filling the cooling system from the thermostat housing in the intake. Makes a huge difference in the end.
Get some smiles per mile son, you deserve it!!  |