In the middle of getting the exhaust mocked up, my new to me injectors arrived. I did some research on the ones that were installed and found out they were only 24# injectors. They may have worked for my application, but they would have been maxed out in duty cycle according to the flow calculator I used. The new injectors are 50# GM injectors. These will be more than adequate for my setup.
The injectors that were installed when I got BISKWIK.
The 50# injectors with EV1 to EV6 adapters and injector spacers in place.
Hopefully I’ll be firing it up soon!!!
Sent from my iPhone using Tapatalk