[Goosesdad]

Started the final steps to the door panels, adjusted the path a bit. Plastic welded most of the shape, this is the inside of that addition, a layer of plastic was laid on top of this.


The arm rests were originally 2 pieces, didn't need to be so I made them a single piece. Better with no seam.


Looks like a lot of bondo (Everglass) but it's a relatively thin skim to get the shape accurate so the leather lays flat. Filler doesn't stick well to plastic at all, even with adhesion promoter. I would've preferred no filler but just can't get it perfect with the plastic iron and sanding.