Quote:
Originally Posted by Stielow
We run -8 lines off the valve covers to a -10. That runs to the top of the dry sump tank. Then the dry sump tank vents through a Mann and Hummel Air oil separator. The 5/8 line coming off the air oil separator runs to the induction tube.
|
Regarding the induction tube attachment, understanding that Mann Hummel -10 line should be downstream of the MAF, have you found there to be an better attachment angle/arrangement? A "T" with the -10 hose connection at an angle to the airflow + away from the short radius bends? I'm finding a larger fresh air vent is needed to help keep the oil clean vs. the stock 3/8" lines.