Built and installed 2 of the 4 support tubes - installed 3/4 all thread rod at all 4 corners for adjustment. Put the tires/wheels under it and the cars ready for ride height adjustment. Looks like I'll need to cut out the inner wheel wells before I can started though. The stock 4.5 wide wheels and the stock wells - just weren't designed to have 11 inches of tread in there !!
Man that 20 years in a storgage bin primer sure is ugly.
Next step: weld in some slip-joint cross bracing inside the body - and split it down the middle and widen the car 10 inches. That should be a heart stopping Point-of-no-Return....
