Keep in mind that unless you leave the PDM on all the time, circuits that would have been on the battery side of the fuse panel will be off. PDM28 draws about 150ma when on, even not doing anything.
Putting a 28 in my car and all of the "battery" items will stay on the OE fuse panel. Everything else will run through the PDM. That short list includes but is not limited to:
1. Headlight Feed
2. Tail/Park/Dome Feed
3. Hazard Feed
4. Radio
5. Trunk Release
6. Gauge Feed (bat) (Dakota Digital)
Also worth noting, 28 circuits sounds like a lot but for a street car it really isn't. Especially if you want to keep circuits separate.
__________________
Donny
Support your local hot rod shop!
|