Quote:
Originally Posted by Tinker
If the low speed temp creeps up here’s an idea if necessary. Some shrouds(mine included) have full coverage but where the fan(s) aren’t there are rubber trap doors that swing open during high speed flow and”suck shut due to the fan’s negative pressure in the shrouded area. Giving the best of both worlds.
|
I looked at the flap idea, based on my surface area, I really only could have added 4, one in each corner, which might have been good enough. . I spoke to some other FFR33 owners who are not running the shroud and have no cooling issues. Since I had to remove the entire front assembly anyway, I went this route. Pulling the front assembly is not something I want to do very often, if ever again... lol