View Single Post
  #569  
Old 07-27-2025, 05:51 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,291
Thanks: 6,966
Thanked 2,129 Times in 978 Posts
Default

Quote:
Originally Posted by fleetus macmullitz View Post
Jody,

Serious question…what new things have you learned from this build?
Getting parts during Covid sucked

Patience

Long builds have a disadvantage of too much time to change your mind; new parts hit the market, new ideas hit your brain, etc.

I'm not even done but there are things I'd do differently now. Wish I would have considered a 19" rear wheel/tire combo out back, just for a little more tire height and to fill the fenderwells better. There are billet intakes now that would allow the intercooler to be located in the intake and top that's low enough to clear my stock SS hood. I like the Texas Speed intake I have and the intercooler I chose will work great, but it was a lot harder to fit in the car and to plumb the additional cold side piping.

For the most part I wouldn't make any radical changes to this build, as this one has been in my head for 50 years. Just picking the right color and getting my car back from Painter Jim are my next goals.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
The Following 3 Users Say Thank You to camcojb For This Useful Post:
89 RS (08-03-2025), fleetus macmullitz (07-27-2025), Tinker (07-27-2025)