Dave,
Front suspension is common un-equal length a-arms attached to B-body spindles,C4 Vette steering rack will be used.Rear suspension is un-equal length 4 link(non-parallel)with PHB.
Coil over shocks will be utilized on all 4 corners. Tires and rims will be conservative street size with decent street compounds.(no rubber band sidewalls)
Sway bars will be adjustable,either interchangeble or accommodations for moving sway bar for or aft and changing length of arms,not decided yet. Both the upper and lower control arms in the rear are adjustable +/- 1" from ride height at frame end and the PHB will be adjustable +/- 3" from ride height.
I am a ways off of that first drive yet, but would like to start making a 'check list' of sorts ahead of time.
Doug
|