unless you have tabs
already welded to the rear end housing you are going to have to zip tie or mount them (hard lines) in some form or fashion anyway. If your rear end housing is not painted or coated you can weld on tabs and use either hard line or the braided stuff.
The main reason I went with braided is it makes it very easy to service the brake system. I do not have to disconect the lines if I need to remove the caliper to change rotors or have them turned. I am running the wilwood calipers, so I do not need to remove them to change pads. Depending on what caliper you are using you may need to.
Just a thought
|