He picked up the car on Saturday and is very happy with the improvements in drivability and power output. I never got a response from Powerdyne, but we're making just over six pounds now and according to the EMS using the calibration data I input from the MAF cal we're flowing 64 lb/min of air. I don't know a good way to estimate power from that. Except for the motor, a six point cage, and subframe connectors the car is stock and severely traction limited. We'll see if he comes back for more after he get's some traction.
Thanks,
Kevin
Last edited by ka67_72; 01-09-2007 at 11:33 AM.
|