Quote:
|
Originally Posted by Rybar
Thanks, I'm going to mount it, behind the firewall (drill a hole)
Where did you mount yours?
|
I made a bracket to hang it on the passenger side of the firewall between the vintage a/c unit and wall. I drilled my wire harness hole in the top of the trans tunnel (I am a freak about hiding everything).
The bracket turned out really cool because I made it to allow the computer to slip fit in place (the sides have a taper on the mount), then I have a small plate that goes on the bottom and tightens up with two nuts. It took me all afternoon one day to rough this out. If you look at the computer, there are very few options to just "bolt" it down.
BTW, what brand header is that (or homemade)?