I have been unhappy with the exhaust on the Impala since the day I picked it up. The previous owner had installed a brand new exhaust system with 5 inch thick flowmaster SUV mufflers under it. Needless to say, the exhaust was hanging way too low under the car and is VERY visable from a side profile.
To solve this problem, obviously the 5 inch thick mufflers have to go. I decided to scrap the rest of the system as well, and have 'my' exhaust guy bend me up a custom system. A quick call to flowmaster to see if they had a 3" thick muffler that had the correct inlet/outlet configuration. No luck. After a quick phone negotaition with the sales guy, and "Bada-Bing" they agreed to make me a 1 off set of mufflers to my specifications!
I am just pumped. I will have the very first set in existance, and they will also create a part number in their catalog!!!! I'll post some pics when they come in, and I get the system bent up!!!
Note: This thread is not meant to be a 'plug' for any particular muffler or company, just excited about my exhaust. Please delete if needed.