[mdprovee]

I am now getting rid of my tunnel ram, and going with a fuel injection setup, and want a supercharger. Not a roots type, but something under teh hood. First off I am a complete novice when it comes to this stuff, so please forgive me if my questions are basic. My motor now is a 383, sbc, and I have heard that with a little more compression, and a little less boost the motor will have better "driveability" than with less compression, and more boost. I am looking for something around 550-600 horsepower.

Here are a few specs.

.030 over 350 4 bolt block.
Forged TRW pistons.
.500 intake, .518 exhaust, duration at .050 232intake, 242exhaust.
108 lobe seperation
Edelbrock RPM Alum. heads, w/ porting and bowl work. 64cc chambers
10.63 Compression

I believe I need to lower my compressions some, with maybe some different heads? So any suggestions on what fuel injection unit to use, and any supggestions on a supercharger? Will I need to change my cam?

Thanks for any help and direction you can give me.