View Single Post
  #1  
Old 02-21-2007, 10:50 AM
aussiebj's Avatar
aussiebj aussiebj is offline
Senior Member
 
Join Date: Jan 2007
Posts: 337
Thanks: 0
Thanked 0 Times in 0 Posts
Default 68 Camaro "Project Swiss Cheese"

I bought a 68 camaro off of ebay and let this be a lesson to help some people what you see and what is explained is not always what you get, if you can keep this one thing in mind when looking at a car through rosie glasses it is this " some peoples definition of good is not always the same as your definition of good'' with that being said i would higly recomend where ever possible taking the trip to go and look ay any car you are considering buying...
I bought this car from Ebay from a guy that owns a body shop, i had him walk around the car while i was on the phone and asked him questions about it ..well the car was hit very hard in the right side as to push the floor back about 2 inches, needs rockers both sides, both floors, two quaters both rear frame rails ,trunk, tail panel,etc not to mention the cowl area has to be pulled ,now don`t get me wrong it was a good deal so i thought, but i can do all the work and it is under way but if you are new to ebay or building cars take someone with you to get a second opinion........here are some pics..
how are the rear frame rails .." NOT BAD" he said take a look




more update to follow..i am also building a 460 powered mav on here
https://lateral-g.net/forums/showthread.php4?t=7849
this camaro will be built from my donor 95 Z28 camaro.

Last edited by aussiebj; 02-21-2007 at 10:53 AM.
Reply With Quote