Quote:
|
Originally Posted by Bowtieracing
Thank you Jim for the idea!! That way the ac and all would be out of sight!
I found all brackets from one guy at ebay.Brand new and about 90 bucks all 5 pieces.
|
Do you one better... here is a picture that will show you where to notch the frame. BRP Hot Rods did my stock sub frame DSE mods. If you look closely, it is really close to what DSE did. DSE's subframe has a relief where the A/C pump won't hit and the R&P goes thru the cross member. Phil did mine with the piece cut out for the R&P to go thru the frame, DSE just made it a tunnel. I went on ahead and had a piece welded over the open spot for added strength and put a Speedway Sway bar front mounted rather than the rear mount that BRP did.
Picture here for the notching:
http://brphotrods.com/parts.html
and DSE's:
http://detroitspeed.com/productpages...frame_pic2.htm
Now DSE's is really a nice piece, but I figure if Mark is running a modified Stock Sub Frame, I can to.