Thread: RX-7 Build up
View Single Post
  #13  
Old 03-05-2007, 09:05 PM
mazspeed's Avatar
mazspeed mazspeed is offline
Senior Member
 
Join Date: Jul 2005
Location: Campbell Ca
Posts: 2,005
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by stylEmon
i'm gonna go auto X with this.
I know of a couple 2-rotors that are in the 450-500 range. Mine should be around 320 hp with stock turbo. It isn't too difficult to do with the right turbo, and proper porting/mods.

My buddies 2nd gen smokes BUILT supra's and hangs with bikes.

You can make all the power you need with a turbo rotary. NA is a little tough to really make power tho. Seems like you exoplored that with the PPort!
If you're going to use this for Auto crossing, then a turbo is a bad idea. It takes a bit of time and rpm's to make boost, but when you are slamming on the throttle and brakes in a race, the boost won't have time to materialize. If you're going with straight auto crossing, I would street port it, but if this is going to be a road car, then you can do whatever you want outside of bridge porting and or PP porting, but a turbo rotary is not going to do very well in the auto x races.
Reply With Quote