Quote:
|
Originally Posted by ProdigyCustoms
This is our accessory drive. It is the first one we delivered, and Mikes shop had to spend a couple hours making some adjustments, milling a piece and some other tweaks. Apparently the production pieces were slightly different then the mock up pieces. So we have another kit now we are doing for MDProove, and are making sure the issue is solved before we ship this or any other kits.
The system looks fantastic. It uses a remote reservoir pump. Combined with custom adapters, brackets and pulleys we make. The right (passenger) side of the kit is a March mid mount set up. The left (drivers) side of the kit is all our making.
There is some minor frame crossmember notching required to fit a stock frame. Basically a C relief in the forward crossmember. And apparently on a Fatman Chassis, a sway bar spacer may be required to clear the large Blower drive. Although both these issues are present doing any blower drive.
The entire kit including complete serpentine set up with polished A/C compressor, polished alternator, polished remote PS pump, remote reservoir, P1SC ProCharger, Surge valve, etc, is just under $6,000
I will have more pics later in the week of MDProove's system, using a Holley Stealth Ram, it is going to be HOTTT!!!
|
If you could either PM me some pics and $ 6,000 seems alot, but it looks so perfect.... PM me when you have more info and I think I would be ready around the end of August. Also, can you sell me the procharge system? Doing a 434 sb, and looking for 10-12lbs boost non-intercooled for now... now I am excited.....
Blessings,