It is hard to know if you are having a similar problem to mine. I was trying to use the March billet ps pump/housing and it was making noise and ejecting fluid, we bled the system many times and felt certain we had gotten all the air out. However, problem was still there. We then had a larger reservoir machined to see if that would help. It did help a little but I still had problems with air/frothing getting into the system. After checking all the connections for leaks, changing out the ps pump itself inside the housing, I decided to go with an OEM setup and that finally fixed it. The issue had to do with either the machining or design(too much cavitation) of the March billet housing. It was allowing air into the system and/or frothing up the ps fluid so much it was starving the system. You can try a remote reservoir. Hopefully, that will fix it for you. My advice.....don't spend over $1,000 trying to fix it like me before going with something OEM.
|