Guy has been steady working on the Motor.
Collecting parts and working on some old parts that needed some TLC.
Way back in the day (April 2002) I was able to locate a sheet metal Moroso 2 Piece main seal Oil Pan.
Trust me it was very hard to Find.
Dennis over at
www.highspeedwelding.com trimmed the front cross member (August 2004) so we would be able
to remove the oil pan just in case there were problems with the motor. It's much easier to pull a pan then pull a motor.
Dennis added some Simple Bracing to the crossmember for Strength.
The Guy's at Rockford Racecraft welded a new pick up to the oil pump to ensure proper oil supply.
