View Single Post
  #35  
Old 06-13-2007, 09:03 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,458
Thanks: 7,633
Thanked 2,329 Times in 1,092 Posts
Default

Quote:
Originally Posted by notorious1970
Heard some of the Camaro guys stopped by the shop. If so what did you think of the Nova thus far?

As of last week the tail lights where being fitted. This proved to be more work than originally thought. The problem is that Novas have a slight curve to them in the back. So you are trying to fit a straight light in a surface that is slightly curved. Rear bumper was also cut up in a bunch of places and refitted. Now its only protruding out of the body line about a 1/2 inch. All of the gapping has just about been complete. Once the rear end is complete the front will be the final part of the body work. The brakes finally arrived as well. They are baer 6 pistons with "rad rides" inscribed on them. They are massive, something like 15" front 14" rear. Check this out.

http://www.radrides.com/home.php

Later!
Derek
I'm one of the "Camaro" guys that stopped in. The Nova is going to be awesome. Troys work is incredible.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote