[TravisB]

I have decided to chang directions yet again with my car....I am going to step up and buy a chassis as I feel it is the right thing to do for my project. This is what I have done and what it has on it......if anyone is interested in the whole thing or peices of it please PM me.

A-body chassis:
-ART tubular control arms(lowers modifed for adjustable ride height with the bags for chassis tunning)
-Spring pockets cut out to lay bag over at a better angle and for ample clearance
-front lower crossmember cut done to set car closer to the ground when air is deflated
-Drop spindles
-Wilwood 12" brakes-drilled and slotted
-Custom x member with integrated trans mount(not fully welded yet would allow for different trans
-Rear frame rails moved in 1.5 in and re shaped to allow the car to sit lower-would require cutting the floor
-3 link rear started and tacked in measurements and CA location not 100% YET
:could change the rear suspension to a 4 bar pretty easy, or tri 4 bar
-stange rear housing with 31 spline axles
-wilwood brakes


I realize that this ia custom set up that not many people will have intrest in but i thought I would give someone a chance at it before I threw it away and parted it out

PM for price as I am very flexible about how much goes with the frame or what peices you might be interested in.