the problem is that we only have forgings for "dished" wheels in 3 sizes. We would need to do 2 things for larger diameter, 1) use plate aluminum (expensive) or 2) create new dies to create new forgings (expensive).
We are currently looking into adding more dished sizes in the future. No time frame at this time for when we would implement
The taper in the spoke in larger diameters is proportional due to the centers (design) being thicker in larger diameters.
Fat-lip rim outers use centers that are 1" larger than Traditional outers. a 17" Fat-lip uses the same center that would be used in an 18" Traditional outer.
|