Thread: Project FNQUIK
View Single Post
  #508  
Old 12-17-2011, 11:18 PM
waynieZ's Avatar
waynieZ waynieZ is offline
Lateral-g Supporting Member
 
Join Date: Oct 2006
Location: Ma
Posts: 8,424
Thanks: 908
Thanked 336 Times in 229 Posts
Default

Well here's a small overdue update. I've been tied up wioth the back and family stuff but I have been working on it.
I started putting the Dynamat in. Here are a few pictures.
I did the complete door sakin and the front part of the quarter panel.




Under the dash is started.




and most of the floor is done.





I put a couple of small pieces in the vent holes where the kick panel goes just to deaden it a little.



I did the 1/2" fuel line from back to front but don't have very good pictures. My wife just came out to get me she thinks midnight is too late to be taking pictures in the garage. Silly woman !





Here's what I have planned for my filters, pump and regulator. It will go at the front of the tank something like Lenie used on his car.



I also put in the brake line front to rear and across the front of the sub frame.







And I bolted up the plates for the DSE connectors so they can be welded to the sub after they are painted.






We drilled and tapped the plates plus put a nut on the back side.
__________________
_Wayne________

___________________________________
https://lateral-g.net/forums/show...ghlight=FNQUIK

Last edited by waynieZ; 09-17-2014 at 05:41 PM.
Reply With Quote