View Single Post
  #31  
Old 04-06-2016, 01:37 PM
David Pozzi's Avatar
David Pozzi David Pozzi is offline
Senior Member
 
Join Date: Sep 2005
Posts: 568
Thanks: 2
Thanked 57 Times in 20 Posts
Default

I'm using a cheap siphon sand blast gun in mine. I have 170 psi shop air available but I found the media flow is reduced at that pressure. The pressure backs up in the gun. I use a regulator to around 90 psi and get a better media flow.
Drilling out the air jet can cause so much air to flow, you don't get as much suction on the media hose. I put a vacuum gauge on mine to set pressure.
__________________
http://www.PozziRacing.com
Reply With Quote