[SuperB70]

Hey all,
Happy new year 2022.

First, bare with my english, I live in Finland. The land of SISU,
also country with most world champions in motorsports and of course Santa Claus = Father Christmas = Joulupukki .

I thought its time to post my project.

Bought as a roller, disassembled left to rot, father-son project from South Carolina about 10 years ago. Then it sat in my yard for years. Been slow going project for past 6-7 years now.
Running own fabrication shop and building customer cars took toll on my own. I also make custom cooling products, you will see that in this.

Now past 5 years been working as hired help, been more time to build this. Now days work as an foreman at local trade school machineshop. Have almost all the equipment it the world to make my parts.

SO I started looking one years earlier for new project.
Vision was some how clear. To build really one off, powerful Grand Tourer. Been saing that I'm driving it gross Europe to Monaco when its done.

It will be low, has hidden tube frame inside its body, inside roof frame,
inside frame rails, double rails at rockers and in the middle, around transmission and drive shaft.
Removable main hope, criss and door bars.
Many body panels will be hand made from aluminium.
Fluss front and back glass, one piece door glass.
As you can see in the photos, body has cutted / drilled open,
brassed and sandblasted with home made retossorie, then I put my frame table together
and installed body on it so that top of the table as ground,
ride hight set to 4", as you can see, front rails dont work with that.
They may be relocating or changing

Engine: Brand new gen 3 Viper 8.3L, (how many knows that its build by ILMOR)
Modified Ilmor crank, my own tool steel main caps,
custom made one off Auto-Verdi connecting rods, Diamond pistons,
Autoverdi 5 stage drysump pump, custom ATI super damber,
ported heads, custom cam, home build intake manifold
with (+2000hp) water to air intercooler,
two cores stacked in one set off head plates. 4"x4"x20"
4.9L Kenne Bell twin screw supercharger,
twin 102mm electric throttle bodies and much more.
Almost all one off custom pieces.

ECU and Fuel:

Maxxecu Pro-ecu, seq fuel with 10x1500cc/min Bosch EV-14 injectors,
Aeromotive 6 gal/min mechanic fuel pump,
seqvental ignition, coil per cyl.
Ecu controlled boost control. (secret stuff still)

Cooling:

Total of 12 cores, all the usual and then some.
Even some experimental stuff.

Transmission:

Reactor product custom made SFI flexplate,
build Mercedes W5A900 trans out of 57 Maybach,
(same used in SLRMcLaren Mercedes),
my own adapter/midplate, paddles, OFGear controller.

Front axle:
Corvette C4, moved 3" forward, fast ratio rack,
mounted stock points on the tube frame,
double adjust coil-overs and air jacks.

Rearend:

Ford 9.75 with true trac, 3.08:1 gears,
own design floater axle system, modern wheel bearing pack,
Self machined (from 300M) axles. 3-link, d a coil-overs and air jacks.

Brakes:

front 15" 6 pot Brembo
rear 14.5" 4 pot Brembo

Wheels and tires:
Custom ordered OZ Racing HTS Leggera
front 8x19 245-40-19 Bridgestone
read 12x19 345-35-19 Bridgestone

Electronics:

State of the art CAM bus system by my good friend,
SPLeinonen (dotcom)
Gauges: Tablets, another good friends Real Dash app.
realdash(dotnet)

join the ride, its gonna be epic...

to be continue..