Thanks!
We did a little in the garage today we decided to put the power steering reservoir next to the brake master. So I took the bracket that holds the Alt,and steering pump off and made a hole above the pump so the return hose could come up and over the bracket then between the bracket and the valve cover. From there it will run over to the reservoir mounted on the inner fender.
Here's where I made the hole for the hose to come up over the bracket.
It will run straight and further away from the header heat.
We're going to try to fit it between the fender and the brake reservoir.
I also secured the trans cooler lines to the Radiator support and test fit them to the cooler.
I finished making up the top radiator hose with the Finch adapter with a spot for the steam hose connection, tomorrow I'll make the -4 hose for the connection.