LS3 manual with cruise control
I have a GMPP Connect and Cruise LS3, T56 with cruise control.
I’m using the Dakota Digital CRC 2000 with the HDX gauges. It works great now.
We had some issues getting it to work initially. It would come on then go back off without setting.
Finally figured out some of the wiring was incorrect (our bad) and I think a pull up resistor was added in the brake light circuit.
We did not install a switch to the clutch pedal to disengage the cruise. If something happens I hit the brake and the clutch at the same time so I didn’t think I needed one.
Hope this helps.
|