View Single Post
Old 10-22-2020, 02:56 PM's Avatar is offline
Lateral-g Supporting Vendor
Join Date: Jan 2018
Location: Pella Iowa
Posts: 56
Thanks: 16
Thanked 27 Times in 17 Posts
Default Versa-Mount Tool Mounting System

Versa-Mount is an ever-growing line of space-saving tool mounts, and shop organization items designed to allow you to work more comfortably and efficiently. The Versa-Mount Wall and Table Mounts allow you to change out different tools quickly and easily by adding optional tool holders or building your own custom mounts. Great for sharing tools between your shop and your race trailer or work truck!

Keep your work surface clear and eliminate the need for a dedicated machine stand with these Versa-Mount receiver-style tool mounts.

The Bench Mount Receiver features a 6-inch square mounting surface with 5/8 diameter holes on 4-inch centers. It can be easily attached to your own workbench above or below the work surface. The hole pattern fits directly with popular Buildpro or Certiflat welding tables. The receiver also includes four jam bolts to produce a rock-solid fit for the tool mount. The receiver is designed to accept 2 x 3/16 inch wall square tubing. Planning to mount this receiver to your BuildPro table? We suggest using four shoulder bolts, BuildPro part number T831610.

Completely free up work surfaces and eliminate floor space wasted on stands with our Wall Mount Tool Receiver. Featuring a 4 x 8 x 1/4 inch thick mounting surface with 3 mounting holes, it can be mounted to any vertical surface in the shop. In addition to a 5/8 inch detent pin, the mount also features two sets of jam bolts to produce a rock-solid fit for the receiver tube. The receiver is designed to accept 2 x 3/16 inch wall square tubing.

The Universal Mount is constructed from 2x2 3/16 wall square tubing and a 3/8 inch thick steel plate measuring 8.5 x 9.5 inches. The mounting plate features both 90 and 120-degree slots to accommodate a wide variety of tools, or you can drill your own holes as needed.

Use our Clamp Tube Mount along with one of our Trick-Tools Receiver Mounts to keep your favorite tool close at hand, but not take up valuable bench space. Add a Swivel Block with Universal Plate or Multi-Use Block to mount a variety of different tools. Built from 2-inch x 3/16 wall square tube and quick release handle finished in black crinkle powder coat.

The Swivel Block bolts to a JD2 Notchmaster, JMR TN1000, and TN300, and Bead Form Tool to use in the Trick Tools Swiveling Receiver Mount. It also accepts our Universal Mount Plate.

The BuildPro Plate Swivel Block mounts Buildpro plates to Trick-Tools Clamp Arm.

Bolt your Baileigh TN-250 to our Trick-Tools exclusive mounting block for the Trick-Tools Swivel Receiver Mount.

We've developed this Universal Mounting Plate to provide a way to secure several of our most popular hand-operated tools. The mounting plate is laser cut from 1/2 thick steel that is then powder coated with an attractive black crinkle finish. The plate can be secured in a vise with the included clamping block, or use the block as a starting point to build your own stand. The plate comes drilled for the following machines, or drill your own holes to mount even more tools.
Our universal mounting plate comes pre-drilled for the following machines:
Beverly B1, B2, B3 throatless shears
Beverly SS2 and SS3 slitting shears
Roper Whitney 16 punch
Roper Whitney 17 punch
Lancaster shrinker and stretcher

1-year manufacturer's warranty
[email protected]
Brycen Smith
Fabrication Specialist for Marketing and Product Development
Van Sant Enterprises, Inc.
75 Truman Rd Pella, IA 50219
641-628-3860 Ext:117
[email protected]

Reply With Quote
The Following User Says Thank You to For This Useful Post:
jarhead (11-13-2020)