View Single Post
  #5  
Old 10-13-2018, 11:13 PM
Blown353 Blown353 is offline
Senior Member
 
Join Date: Nov 2004
Location: Central Valley, CA
Posts: 916
Thanks: 0
Thanked 87 Times in 34 Posts
Default

Quote:
Originally Posted by RdHuggr68 View Post
I looked up the 100-7729 ARP number and they are for a Subaru/Scion. The 100-7722 has a knurl diameter of.550 1/2"x 20 compared to stock studs knurl diameter is .509 . Are you staying with 12MM studs?
Whoops, typo. I meant the 100-7723 studs. They're 1/2-20, 3.1" UHL, 0.615" knurl diameter, and have a flat spot ground on one side of the flange that will clear the C6 e-brake actuator if you clock the flat spot correctly when installing them. The flanges are also smaller in OD than the 100-7731's so they clear the SKF hub body.
__________________
1969 Chevelle
Old setup: Procharged/intercooled/EFI 353 SBC, TKO, ATS/SPC/Global West suspension, C6 brakes & hydroboost.
In progress: LS2, 3.0 Whipple, T56 Magnum, torque arm & watts link, Wilwood Aero6/4 brakes, Mk60 ABS, Vaporworx, floater 9" rear, etc.