Quote:
Originally Posted by gnx7
In all the T56, T56 Magnum (TR6060) conversions I do we run a 7/8" bore MC.
I have also found that the slaves once depressurized have a high likelihood of failure.... meaning I never install a used one unless it is 6 months old.
Start with the MC replacement and if the new one that doesn't leak works... run it. If not... replace the slave also.
|
The McLeod m/c adapter uses a wilwood 3/4" m/c that been modified to fit their bracket, so I have to stick with 3/4" for now.
Yeah, I should have replaced the slave when I was putting it together. But I was over budget, so was trying to save $$. Good thing it's only my time.
So I replaced the m/c, no change. So dropping the trans and replace the slave is next.