I decided I needed to come back and read this, and watch some videos.
Will be practicing on 18-20 gauge sheet metal scraps. I want to work on my Torino cowl after I learn from my mistakes, it won't be seen but I want to do a good job. I've already repaired some of it with MIG.
I was just at the local welding supply to get argon (92CF). He reccomended, and I bought.
*70S-6 filler 1/16X36 here pounds.
* 2% cerriated tungsten in 1/16 and 3/32, I bought one of each.
My family gave me the HTP-221 for Christmas, and it has an assortment of gas lenses, none of which are clear. It has a 17 torch and the standard lenses, etc.
The question is did I buy the correct supplies to get started burning coupons?
Thanks!
|