Quote:
Originally Posted by Car Guy
I'm working on a sports car with IRS that is going to have air bags. I've taken out the coilovers to see how much negative camber the car has. I need to raise up the upper mounting tabs on the frame so I can reposition the angle of the upper a arms so I can reduce the negative camber.
I'm having issues with keeping everything centered once I move everything up from the factory position. How do i keep everything in the stock location, while I move up the mounting brackets?
Do I need to make a jig to hold everything? It's going to be a lot of trial and error to get the right spot, just need to know how to start. Thanks
|
If you move the upper arms, you should probably move everything else up as well. Moving just the upper arms will create other issues with geometry. Pics and/or other details on what you are trying to accomplish will be helpful for the crowd here.
Sent from my iPhone using Tapatalk