So the plan for now is working with what I have. I'll use the Fusion controller and harness to run both of my smaller Spal fans together. They would flow just under 1900 CFM at max over most of the core. I'll see what happens.
My plan is to take power for the controller from a stud in my engine bay that is wired directly to my trunk mounted battery. This is would be a short 4.5' run to the controller. While I'd like to use a single Jcase fuse and 10 awg wire, I can't find one I like. I do have a 60A Maxi fuse and holder that I will use for now. Coming out of the controller, I was contemplating using a distribution block that will wire the two fans. I was thinking of further fusing these two at that block with smaller fuses(30A each), but this may be redundant. I do feel that these would blow much quicker should the need arise over the 60A upstream.
Any thoughts?
__________________
1971 Firebird
2017 SS
|