[gnx7]

Fuel system is plumbed! -12AN feed and -10AN return

brake system is next to address
going with Wilwood 6 piston Aero6 calipers and 14.25"x1.25" slotted rotors up front

Any feedback or some recommended changes you guys see.... speak up!

I want to run 18" rims all around.... and have the option to put in a 17" skinny drag front runner with hubcentric spacer... and a 15" rear 275 Pro drag tire to try to see what it will run; however with a 13 or 14" rear brake I don't see that being possible.

Built up a fresh LS9 shortblock with RaceTech 4.070" pistons LS9 crank/Ti rods topped off with fully ported LS9 heads/LS3 intake and Johnson linkbar lifters. Shake it down with the 5.3 and then this goes in. The crank snout was cut to convert to wet sump. Going from 5.3 liters to 6.2 will help a ton with spooling the turbo. This turbo went 162mph in my 2900lb LS9 RX-7 best at the strip. My goal is 150mph in the 1/4!