View Single Post
  #8  
Old 06-21-2021, 11:22 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,181
Thanked 1,443 Times in 625 Posts
Default

Quote:
Originally Posted by 72Z/28 View Post
Steve please let us know once you fix this issue.
I am having exact set up as yours with OEM PCM and Cammed LS6.
The engine stalls and dies if I rev it when the vintage air AC is on. This happens when the AC clutch is engaged.

The rpm drops below the desired rpm and stalls. In fact, sometimes when letting off the throttle and pressing the clutch to come to a stop, the rpm drops and engine dies even before coming to a dead stop
If the IAC settings and base idle screw are adjusted correctly I would look at the Throttle follower tables. I've had this issue myself and adjusting the throttle follower tables allowed me to slow down the rate the throttle drops and eliminate the overshoot on a snap closing of the throttle blades.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote