View Single Post
  #27  
Old 05-11-2017, 06:08 AM
Goosesdad's Avatar
Goosesdad Goosesdad is offline
Lateral-g Supporting Member
 
Join Date: Apr 2015
Posts: 588
Thanks: 972
Thanked 521 Times in 255 Posts
Default

Quote:
Originally Posted by dontlifttoshift View Post
Different and aesthetically unrefined.



The outer housing from the E stopp is threaded directly into the block on the right as is the inner cable from the right side park brake.

The inner cable from the E stopp is threaded directly to the block on the left side as is the inner cable from left side park brake. The blocks look like this, I think I had to retap the blocks to match the threads on the Estopp cable and housing.



The outer housings that route to the park brake are mount to a piece of 1" box tubing with a tab on each end. All of the load is contained within that bracket and there is no load at all on the mounts of either the Estopp or the bracket holding the cables.

Why do it this way? When the Estopp is engaged, it tries to pull the inner cable into the outer housing.....pulling the left and right park brake cables closer together. Because it floats, it self equalizes, ensuring that the pulling force is equal between both sides.
Well played sir!! Thanks for sharing.
__________________
Have a great day!
John

My Build Thread:
https://lateral-g.net/forums/showthread.php4?t=53320
Reply With Quote