View Single Post
  #10  
Old 05-14-2018, 03:07 PM
nickcornilsen's Avatar
nickcornilsen nickcornilsen is offline
Member
 
Join Date: Oct 2011
Location: Roseburg, OR
Posts: 83
Thanks: 0
Thanked 24 Times in 14 Posts
Default

Winter 2017

More progress made!



This shows my AC unit installed under the dash, as well as the access plate for the top of the torque tube. That will be how I bleed the clutch.





Firewall Completed! This took alot of fidding, and thinking everything through. I had to buy and install the throttle cables to make that work, install the pedal assembly, and so on. I wish I didn't have to make such a patchwork, but to get everything to fit, and given my tooling limitations, I did the best I could.





3 Coats of Southern Polyurethane Epoxy!

The next phase of this project is to finish the core support, inner fenders, steering linkage, and swaybars.



Core support installed.




Motor placed, radiator just set in for reference. Lots of room for a fan! You can see the downbars, and swaybar tube mounted. the C5 bar is too wide, given that I narrowed the suspension up by 4 inches. I bought a speedway Engineering hollow tube, and pillow blocks.
Reply With Quote