Thread: Project 1969
View Single Post
  #15  
Old 09-28-2014, 11:21 PM
Sonar Chief's Avatar
Sonar Chief Sonar Chief is offline
Senior Member
 
Join Date: Dec 2011
Location: Greater Denver area
Posts: 1,332
Thanks: 245
Thanked 160 Times in 71 Posts
Cool Nice

Quote:
Originally Posted by Intimidator3 View Post
Okay, a few more updates to get ya'll to present. Since I got it back this past winter, I worked on seam sealer in the interior and exterior. Also worked on the surface rust in places to help preserve the car for the winter since I did not yet have a paint shop lined up that did not have a 9 month waiting period. So I worked on the interior first. I cleaned and applied #M Seam sealer to all seams. I stripped any rust off and e-coating with a rotary nylon abrasive brush. (Thanks Sonar Chief) I then cleaned, taped off and shot the areas with Eastwood's Epoxy Primer to seal it well.

You are very welcome .... its not a fun way to spend an afternoon, but its gotta get done. Very nicely done .... good that its in epoxy, I have some spraying to do on the underside, Yipee!

Just an FYI ... I used Eastwood Frame coating under the seat frames there cuz when I cut into them for the sub frame connectors there was RUST, so I sprayed away before I weld the top back on.

Camaro is lookin good!
__________________
JUST PICTUREShttps://imageshack.com/user/mcavery


Let the house go .... NEVER give up your car!!!!
Reply With Quote