I looked into three suspension manufactures ( Detroit Speed, TCI and Speedway Motors. I based my decisions on quality, features, capabilities and price. Ultimately I felt like the Speedway Motors G-comp offered the best bang for the buck. I opted for the Unser Edition. It uses a fabricated spindle that has a bolt in C-7 Corvette hub and wheel bearings, billet steering rack and sway bar mounts, aluminum coil over uprights that tie to the down bars and a aluminum crossbar that ties the uprights together. I have had good experience with Ridetech coil overs so I choose to use them front and back.
Kmelander It does look tall in the photo. Really not that bad. These cars had small tunnels. I’m shooting for a 2-3 degree angle on the engine and trans.
Thanks Marty it’s a different color for sure.
Last edited by 64G-lark; 10-26-2020 at 10:44 PM.
|