View Single Post
  #2  
Old 12-09-2015, 03:25 PM
will69camaro will69camaro is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Location: Houston
Posts: 1,409
Thanks: 206
Thanked 121 Times in 70 Posts
Default

I think you will have a hard time making it fit. The space between the drop in the center (where the dash sticks out) and the bottom is too short for the holley screen. I'm sure if you're willing it can be modified but it will be a tight fit.

I am looking at putting a racepak IQ3s in my car and it was a TIGHT fit and it's over 1/2" shorter.

This is my DSE dash with the IQ3 set in the position it would be installed and as you can see it's very tight fit.


The racepak dimensions are a good bit smaller than the holley in height.


Holley is 4.625" tall and 7.5" wide. Width should be no issue, but height will be the difficulty.

William
__________________
Texas A&M BSME 2008
1969 Camaro - Hugger Orange
1969 C10 SWB - Hugger Orange
2018 GMC Denali HD
Reply With Quote