A little more progress on the frame notch today. Yesterday we welded in the first two pieces.
First the L shaped piece was welded in so it could be welder all the way around and then the top was ground so the next piece would fit tight against it and also be welded in.
It was ground smooth so the next piece could be fit and welded in.
Then I made the piece and fit it to cover the rest of the opening and Spaceman welded it in.
At the top he filled a couple of holes in the frame.
Then I ground the welds down to close to where we needed it.
When Spaceman gets here tomorrow we'll take a look at the frame connetors where they weld to the back of the frame and decide if we want to do them now or later.
Feels good to be back out here again.