It was a bit more "cut up" when it got to me. Looked like it was a nice car.
So we found a set of wheels that he could use but we chose to rehoop the rears from 10.5/19's to 12/19's and buy a new wheels for the front. Its nice to have several sets of Forgelines at your disposal.
After figuring out what backspaces we needed we began to tear into the car. Full interior gut, strip out the old wire harness and then start cutting up the body. We needed a bit more room in back so we are doing a quarter panel stretch.
The customer wanted a different door bar set up for the drivers side so we cut the old one out. While we had it out we decided it would be a great opportunity to redo the floor, wire brush, clean, prime and a coat of POR15 hardnose epoxy paint in light gray with liven things up a bit.
Last edited by Vince@Meanstreets; 04-04-2014 at 12:29 AM.
|