View Single Post
  #9  
Old 01-13-2020, 04:57 PM
WOLF1732 WOLF1732 is offline
Junior Member
 
Join Date: Dec 2019
Location: Atlanta
Posts: 2
Thanks: 0
Thanked 1 Time in 1 Post
Exclamation Floater-Setup

If you have a speedway engineering floater you need to go with option 1
if you have a oil pump in the floater like some NASCAR rears and you can provide positive lubrication to the bearing sets go with option #2.
As a side note make sure you use a solid bearing spacer to lock the bearing pre-load.
In alum hubs this a must you "might" get away with not doing it on steel hubs.
Reply With Quote
The Following User Says Thank You to WOLF1732 For This Useful Post:
Goosesdad (02-02-2020)