[SSLance]

Same cam... Bit more compression, bit more dwell because of rod length change and revs faster because of better balance.

The learn table initially asked for some stuff that was pretty strange. We chased it for a while and figured out we were going the wrong way. We found a couple of little things that were contributing to the "strangeness", fixed those and now we are back on the right track getting it real close once again. It's been pretty close all along, we are just fine tuning it trying to make it as good as it can be.

The process basically is to drive the car letting it learn and compensate live, then we look at the learn table once back in the garage and decide how to make permanent changes to the base fuel table etc.