[Gscherer78ta]

I have the above combination which seems pretty rare. I'm trying to see if anyone has been through this functional shaker scoop mounting before and I don't have to invent something.

The issues are:

1) The LS/Victor intake don't match the line of the hood front to back. At the front the hood is ~1" from the factory air cleaner assy. And the back of the air cleaner assy is ~2".

2) The Air cleaner assy is also about 1" over to the pass side. So the stud that comes out of the TB is ~1" towards the passenger side from the line in the hood.

Thanks in advance!

Greg