Thread: which Camshaft?
View Single Post
  #3  
Old 10-28-2018, 11:45 PM
eville's Avatar
eville eville is offline
Senior Member
 
Join Date: Feb 2006
Location: San Leandro, CA
Posts: 170
Thanks: 19
Thanked 8 Times in 8 Posts
Default

Quote:
Originally Posted by 67_camaroRS View Post
i have a 396 Big block motor with stock large oval port heads. Upgraded springs and rockers. stock rocker ratio. hardened pushrods etc. Stock crankshaft and new but stock style rods and pistons. It has a compcams #11-250-3 Cam in it. It has a choppy idle but has all the power at the high RPM range for a street car (67 Camaro). Duration Int/Ext: 284/296 -- Valve lift: 574/578 -- LSA 110. I'm looking for a cam that can deliver most its power in the lower to mid RPM range, and something that wont lose a lot vacuum. what can you guys recommend me? Thank you.

other info: TH400 tranny, 3.73 rear gears, 305mm rear tires,edelbrock performer air gap intake, 750 holley carb.
Th guys at chevelles.com are big cam gurus especially for big blocks.
__________________
Steve
'68 Camaro - 355", TKO600, SpeedTech Arms, ATS-AFX Spindles, Hotchkis Springs, Forgeline Wheels, C5 Brakes (Kore3), Holley Terminator EFI

Check it out Here
Reply With Quote
The Following User Says Thank You to eville For This Useful Post:
67_camaroRS (10-31-2018)