Here are the Part Numbers for the GM PWM Module Connector

[andrewb70]

Originally Posted by will69camaro

I ordered the above parts and the PWM controller from the link below:

http://www.amazon.com/ACDelco-15-808...rol+Module+Kit

When I tried to insert the empty shell into the PWM controller it didn't fully engage so the locking tabs would hold the shell into the PWM controller. Does anyone have a picture of the above parts fully engaged into the PWM controller?

I'll snap some photos when i get home.

There is a cavity in the connector that must be hollowed out so that the tab on the fan controller can mate with the connector.

Andrew